.: Upgrading to full Alarm
SURPRISE!! Audi cut the North American market short again. I can't tell you how long I looked for the alarm interior bypass button that I had got used to in MY B5!! What was Audi thinking.
So this project was to upgrade the factory North American alarm to the ROW alarm and include the sensor and over ride buttons. Over all the install isn't to difficult but it takes some careful measuring and a little bit of wiring. So lets move it along.
This is a fairly easy modification so I would rate it 4 out of 10 for difficulty.
Coding:
The last and final step is telling module 46 that you have the sensors installed now.
Log into 46 with Vagcom (VCDS)
[ECU 46]
[Coding - 07] -> [Long Coding Helper]
-> Byte 1 Bit -> 1,2,3,4 Change 0 to 1
Or Check the boxes for the items you see highlighted in blue. One or two of these may already be selected.
Exit and save your coding. your now done. If you want to change the sensitivity of your tilt sensor or the interior sensor you can do so in the adaptation of 46. The drop down list on the latest releases have the items listed in the know options so you can get to them easily.
Please note: AudiEnthusiast.com is in no way associated to Audi or VW in any way shape or form. All brand names and manufacturers listed here are for informational purposes only and are in no way endorsed by AudiEnthusiasts.com unless stated other wise.
WARNING!! All modifications and changes are done at your own risk. This site in no way approves the modifications performed here for your vehicle. Please check with your dealer before performing any changes as they may void portions of your factory warranty.