.: VAG COM

** Coding I contributed to or discovered is marked with an ** after the title.

.: The Coding

Keep LED DRL's on With Turn Signal

Keep LED DRL's on With Turn Signals
[09 – Cent. Elect.]
[Coding - 07] -> [Long Coding Helper] -> Byte 3 Bit 7 - Change 1 to 0

Turn off amber side markers (US models Only)

[09 – Cent. Elect.]
[Coding - 07] -> [Long Coding Helper] -> Byte 10 Bit 3 - Change 1 to 0

Front Fog Lights stay on with High-beams **

[09 – Cent. Elect.]
[Coding - 07] -> [Long Coding Helper] -> Byte 4 Bit 1 - Change 1 to 0

Rear Fog Lights stay on with High-beams **

[09 – Cent. Elect.]
[Coding - 07] -> [Long Coding Helper] -> Byte 4 Bit 2 - Change 1 to 0

Headlights on all the time **

[09 – Cent. Elect.]
[Coding - 07] -> [Long Coding Helper] -> Byte 4 Bit 5 - Change 0 to 1

Fog Light turns on with turn signal (Curb Side Lighting)**

[09 – Cent. Elect.]
[Coding - 07] -> [Long Coding Helper] -> Byte 4 Bit 0 - Change 0 to 1

*Headlights must be on without Fog Lights for this to work.

Front Turn Signals as Parking lights **

[09 – Cent. Elect.]
[Coding - 07] -> [Long Coding Helper] -> Byte 10 Bit 0 - Change 0 to 1

Once the change has been made you can enable the front turn signals as DRL's by making the following change

[09 – Cent. Elect.]
[Coding - 07] -> [Long Coding Helper] -> Byte 2 Bit 6 - Change 0 to 1

Emergency Brake Flashing Lights

This change allows the brake lights to flash rapidly in the event of emergency braking.

[46 - Comfort System]
[Coding - 07] -> [Long Coding Helper] -> Byte 8:
Bit 0 – Emergency Brake Flashing via Turn Lights active (1 = active)
Bit 1 – Emergency Brake Flashing via Brake Lights active (1 = active)

I have not been able to confirm this working on my own car although it is coded. I have seen video's of people who have enabled this though and it's cool feature. During emergency braking your brake lights strobe momentarily before going solid.

Adjust LED Brightness

This will allow you to change the intensity of the LED's when your headlights are on. By default the LED's are only 8-9% or brightness.

[09 – Cent. Elect.]
[Security Access - 16] (enter security code. One of the default codes is- 20113)
[Adaptation - 10] -> Channel 3
Enter new value for LED brightness i.e. "100" If you want LED's at 100%.
Values bellow 5 turns the LED's off and generates an error code and warning in DIS .

Keep LED's at Full Brightness with Parking Lights

This will stop the LED's from dimming when the parking lights are turned on.
[09 – Cent. Elect.]
[Coding - 07] -> [Long Coding Helper] -> Byte 3: Bit 2 - Change 0 to 1

Coming soon

More Coming Soon..

Please note: AudiEnthusiast.com is in no way associated to Audi or VW in any way shape or form. All brand names and manufacturers listed here are for informational purposes only and are in no way endorsed by AudiEnthusiasts.com unless stated other wise.

WARNING!! All modifications and changes are done at your own risk. This site in no way approves the modifications performed here for your vehicle. Please check with your dealer before performing any changes as they may void portions of your factory warranty.